Recent content by Air Down Gear Up

That's certainly a new approach to providing a sleeping platform! Do you have a feeling for where you'd expect pricing on a product like that to fall?

We have a system for 3rd Row GX550's as well! For the 3rd row models, we remove all of the associated 3rd row components and create a structural mounting system. The 3rd row is simply added weight and a loss of available overhead height above the system, and would be completely inaccessible...

Definitely an interesting thought! There are certainly means of accomplishing that. That not anything we currently have available, but something we could entertain.

working through your questions: Cost: That system as shown is $3800 Kennel Size: Those are two 'Intermediate' gunner kennels and they BARELY fit (they are gigantic) Sleeping Systems: in the 'ultra low' there is no sleeper compatability, but in a 'low' system you would have a sleeper option. The...

Realizing we have not done a great job keeping up with this forum! We worked with a customer earlier this year on a (very) low height system to allow them to run two dog kennels. Essentially, this was the absolute lowest that we could go and still have a mechanically-functional drawer. This...

GX550 3rd row Denver Area, We need you! We are looking for a GX550 with 3rd row that can make it into the shop to verify some product fitment. If you have a 3rd row and are looking for a sweet deal on a drawer system let us know!

Hi Everyone! A quick update on our system: We have (finally!) been able to get a few pictures showing how our system provides full access to the OEM air compressor. There's enough clearance to run the standard OEM hose kit, so full utilization of your air compressor is still capable with the...

The ADGU GX550 drawer interior dimensions are 15.3" width, 36" length, 8" vertical clearance. Roughly 70 liters (~74 quarts) per drawer. Full access to the OT factory compressor is provided by the top-access wing and from the face of the system with the drawer extended. This allows enough room...

We sure do! Our system has a mechanically integrated (no loose parts!), convertible sleeping platform that allows you to keep your 2nd row seats in place when the sleeper is not needed, and then fold the seats down and deploy the sleeper when you do. We have some fancy bracketry that locks the...

That is certainly good feedback! We can definitely entertain a drawer-only, lower height system if we're seeing more and more demand for a product like that.

:ROFLMAO: Well perhaps you're onto a whole un-tapped market that's ripe for development. On a much more boring note, I suppose that Dissent swing out really could be used for building out a great shower setup with a water heater and everything!

That's a great question! We'll have to reach back out and try to track that down! One thing we have observed with our own Dissent Armor is that they are surprisingly light weight. Often only marginally heavier than the factory stuff coming out. We haven't weighed that exact GX550 configuration...

We heard you like drawers, so we put drawers on your drawers :LOL: That kitchen sets up in seconds and is totally free standing, which is nice when you're in the mud, snow, etc! And you are correct on that panel mounted to the DIssent Bumper Swingout, that's secured storage. We the same...

Sadly we will not. That's potentially going to be a stop in 2026, but we didn't get in on that expo in time this year! We will be at the Overland Expo Mtn. West in August, if that helps.

More details to come, but our GX550 Kitchen system is ready to go! Shown here with and without the optional 'light duty enclosure'. We also offer a full-metal, load bearing version of the enclosure.