New Member from AZ

PHX-GX

Member
Joined
Feb 23, 2026
Messages
46
Media
21
Reaction score
40
Location
Phoenix
Hi all,

Long time reader - finally was able to pick up a new 2026 OT from Bell Lexus in North Scottsdale last week.

I was waiting for a stock, no PIO/DIO Incogntio OT from Pembroke Pines since Christmas, but had to dump my ‘14 4-series BMW due to a leaking gasket among other minor issues making it not worthwhile to repair at 130k miles.

Dealer adds below — obviously at a mark up, I would have done most of them had I purchased the Incognito. I even managed to get them to knock 30% off of the DIO (still overpriced, but a small win). Wasn’t a fan of the white from photos online, but seeing it in person changed my mind, and looks great with the stealth wrap.
  • Stealth PPF
  • Ceramic tint
  • Lift (Westcott, I think?)
  • Falken LT285/75R17
  • Method 321 (unsure on offset, maybe +25 based on the options on Method’s site)
Haven’t driven too far, but mileage with the 35s has been reasonable. A quick 20 min of city driving both ways I had 15.6 and 16.2, normal driving. Still on my dealer provided fill up after a week of local driving, aside from the dealer to the east valley (~45 min, mostly freeway).

Still getting used to driving it after driving a coupe for the last 10 years, but loving it so far. Minimal experience driving off road but looking to do some light stuff while the weather is still nice.

I’ve learned a ton from reading through this forum, have a handful of interior upgrades in the works (all the ‘must-haves’ mentioned throughout the other threads), still brainstorming on any exterior changes but I’m enjoying it as is for now.

‘Welcome’ photo of the truck and the wheels/tires attached.

Cheers!
 

Attachments

  • IMG_3347.webp
    IMG_3347.webp
    256.9 KB · Views: 321
  • IMG_3344.webp
    IMG_3344.webp
    179.6 KB · Views: 209
Welcome from South Scottsdale. Wait until you see the pearl under some lighting at night love it.
 
Thanks all.

Just ‘installed’ the rear seat cargo liners. Bought off Amazon from a rec I saw here, for $50 it’ll do the job. Velcro could be more abundant, but it’s sticky. Will test them on the next Home Depot run. Can link if anyone’s interested.

MagSafe mount and charger went in today too. Waiting on matte/gloss front emblem overlay, OCD screen protector, and Land Bully cool box tray.
 

Attachments

  • IMG_3350.webp
    IMG_3350.webp
    315.8 KB · Views: 166
  • IMG_3351.webp
    IMG_3351.webp
    197.5 KB · Views: 169
Good ol' Bell -- knew their parts guys real well trying to keep my 100 series in shape.
 
Thanks all.

Just ‘installed’ the rear seat cargo liners. Bought off Amazon from a rec I saw here, for $50 it’ll do the job. Velcro could be more abundant, but it’s sticky. Will test them on the next Home Depot run. Can link if anyone’s interested.

MagSafe mount and charger went in today too. Waiting on matte/gloss front emblem overlay, OCD screen protector, and Land Bully cool box tray.
I have those same seat back protectors. I just unloaded a wheelbarrow that has been used to mix concrete all week out of the back of my truck. Those seat back protectors and the thick rubber cargo mat are great.
 
I have those same seat back protectors. I just unloaded a wheelbarrow that has been used to mix concrete all week out of the back of my truck. Those seat back protectors and the thick rubber cargo mat are great.
Hello from Arizona! Purchased mine in Wisconsin during summer but drove it down here. My experience with Bell Lexus in Scottsdale has been very good. I have split buckets in the rear and wish I had the bench seat like you. We have to rig pillows across so the dog can lay flat. I welcome any ideas from others.
 
I haven't seen a 2-bucket rear seat truck in person, but I'm sure you could build a simple wood box or something like a small end table that would match the level of the rear seat bottom cushions and put it between the bucket seats. When you wrap wood in thin black auto carpet (like the stuff used on subwoofer boxes) it looks very professional. You could even glue a thin black cushion on top (or beige if that's your interior color).
 
Got the emblem overlay on today. Super easy. Looks much better, wish it came with the rear black emblems (although mine came with the ‘GX550’ debadged, only the ‘Lexus’ is black).

OCD screen protector going on tomorrow, and NYTOP cat shield should be delivered. Hopefully get to that this weekend.

Now to do something about the chrome pieces on the front/rear bumpers…considering plastidip?
 

Attachments

  • IMG_3362.webp
    IMG_3362.webp
    125.7 KB · Views: 129
  • IMG_3363.webp
    IMG_3363.webp
    125.1 KB · Views: 153
Got the emblem overlay on today. Super easy. Looks much better, wish it came with the rear black emblems (although mine came with the ‘GX550’ debadged, only the ‘Lexus’ is black).

OCD screen protector going on tomorrow, and NYTOP cat shield should be delivered. Hopefully get to that this weekend.

Now to do something about the chrome pieces on the front/rear bumpers…considering plastidip?
Looking good. I have the Catshield -
It’s worth every penny given how exposed the cats are. NYTOP also makes a great hitch cover to ditch the diaper in the back look .
 
NYTOP catshield went on this afternoon - super easy following the provided guide and the detailed instructions posted by @Bluegill - thanks for that!

Left all 4 wheels on the ground. Easy access with the lift and 35s. Pro tip - used the foam pad that it was shipped with as a mat, made the garage floor a lot more comfortable.

Overall pleased with the quality and easy install. All the bolts went in smoothly and even have extras to add to my ever-growing collection now…
 

Attachments

  • IMG_3381.webp
    IMG_3381.webp
    94.9 KB · Views: 147
Thanks all.

Just ‘installed’ the rear seat cargo liners. Bought off Amazon from a rec I saw here, for $50 it’ll do the job. Velcro could be more abundant, but it’s sticky. Will test them on the next Home Depot run. Can link if anyone’s interested.

MagSafe mount and charger went in today too. Waiting on matte/gloss front emblem overlay, OCD screen protector, and Land Bully cool box tray.
Looks great! Can you share the amazon link for the rear seat cargo liners?
 
Painted the chrome rear bumper pieces to match the black bumper. Easy job, turned out great.

Masked it off and used 4 coats of plastidip. Matched the rest of the bumper/diaper perfectly. There’s a piece on the front that’s up next.
 

Attachments

  • IMG_3399.webp
    IMG_3399.webp
    165.5 KB · Views: 143
  • IMG_3401.webp
    IMG_3401.webp
    38.2 KB · Views: 144
Finished up the front piece. It seemed to be held in by clips, but didn't want to risk breaking any so I just masked it off.

Took off the bottom metal piece (6 small bolts - 10mm socket) to block off the large holes for airflow with some cardboard. Ended up painting it since it was off although it’s not really visible.

This will inevitably get damaged by rocks and debris, but a cheap solution to match the bumper and can be touched up easily.

Excuse all the bugs, took out a solid portion of the AZ population on a day trip up north.
 

Attachments

  • IMG_3441.webp
    IMG_3441.webp
    130.9 KB · Views: 127
  • IMG_3443.webp
    IMG_3443.webp
    167.5 KB · Views: 119
Hi all,

Long time reader - finally was able to pick up a new 2026 OT from Bell Lexus in North Scottsdale last week.

I was waiting for a stock, no PIO/DIO Incogntio OT from Pembroke Pines since Christmas, but had to dump my ‘14 4-series BMW due to a leaking gasket among other minor issues making it not worthwhile to repair at 130k miles.

Dealer adds below — obviously at a mark up, I would have done most of them had I purchased the Incognito. I even managed to get them to knock 30% off of the DIO (still overpriced, but a small win). Wasn’t a fan of the white from photos online, but seeing it in person changed my mind, and looks great with the stealth wrap.
  • Stealth PPF
  • Ceramic tint
  • Lift (Westcott, I think?)
  • Falken LT285/75R17
  • Method 321 (unsure on offset, maybe +25 based on the options on Method’s site)
Haven’t driven too far, but mileage with the 35s has been reasonable. A quick 20 min of city driving both ways I had 15.6 and 16.2, normal driving. Still on my dealer provided fill up after a week of local driving, aside from the dealer to the east valley (~45 min, mostly freeway).

Still getting used to driving it after driving a coupe for the last 10 years, but loving it so far. Minimal experience driving off road but looking to do some light stuff while the weather is still nice.

I’ve learned a ton from reading through this forum, have a handful of interior upgrades in the works (all the ‘must-haves’ mentioned throughout the other threads), still brainstorming on any exterior changes but I’m enjoying it as is for now.

‘Welcome’ photo of the truck and the wheels/tires attached.

Cheers!
Welcome!

I picked up my ‘25 OT+ from Bell back in Oct with a similar aftermarket setup and absolutely LOVE mine!

Sounds like we got similar Falken 35” tires and the wheels with my kit were from Fuel.

We’ve had no issues and all we get are compliments or folks asking about ours.

Enjoy your new head turner and let us know if/when you take it off-road!
 

Attachments

  • IMG_6042.webp
    IMG_6042.webp
    383.2 KB · Views: 120
  • IMG_5429.webp
    IMG_5429.webp
    319.8 KB · Views: 107
  • IMG_5443.webp
    IMG_5443.webp
    234.6 KB · Views: 94
  • IMG_0088.webp
    IMG_0088.webp
    99.5 KB · Views: 108

Users who are viewing this thread

GX550 Poll

  • Yes, I can pick up in Los Angeles (Burbank area)

    Votes: 7 41.2%
  • Yes, but I need it shipped.

    Votes: 10 58.8%
Back
Top Bottom