Recent content by markmanner

You spend your money, others can spend theirs.

Or, ones that would have gone over your windshield before by an inch now can hit it :).

It certainly doesn't feel to me to be any less stable to me on surface road speeds or on the interstate, or when turning. I wanted it for the slightly extra ground clearance, and not to change the ride, so I'm happy with it. I think any difference in the way it feels would not be significant...

Thanks, great info, and the details are why I had the Lexus dealer do it all. I didn't feel competent choosing or overseeing it elsewhere. Others with more experience and ability of course can do that. M.

1300 for the install, and about the same for the springs

I decided to have my dealer do everything because I wanted to torture them if things go wrong in the future without them fighting me about how the springs were swapped incorrectly, etc.

I don't know the answer to that. The 2025 springs I had installed were 2x Spring Coil Front - 48131-60U30 2x Spring Coil Rear - 48231-60Q00 I think others have reported that those part numbers are the only differences between the 2025 and 2024, but I haven't confirmed that otherwise.

I measured the 2024 springs that Lexus removed yesterday, picture attached. Both sets of springs had 7.5 turns. The larger ones were 17" tall and smaller 16" tall. The way I measured that was from bottom surface the springs were sitting on to the highest point of the end of the 1/2 turn of the...

Hi, I'll do that tomorrow and post a report.

Hi, mine were installed today by Lexus of Nashville. Did a great job. Service guys were interested in the process (and the NYTOP bumper and sliders I had on it) so I think they paid some quality attention. Pics Left and Right with measurements pre/post, and a front view and pic of the old...

Mine are getting installed Monday. My measurements pre-install are about 1" lower than yours as I am using the stock OT tires. I took a side picture at a marked spot and will redo once it is installed to do a visual compare (as well as measuring too). Best, Mark

My install is set for about a week from now. I'm going to take pictures before and after in a particular spot with the camera on a tripod, in addition to measuring. It will be interesting to see the side by side pics I think (I hope!)

Hi, where is your dealer located?

Hi, thanks for this info! As far as weight goes, I got the aluminum version of the NYTOP bumper. I weighed the parts I removed and the NYTOP bumper before install and the net increase was only 27lbs.

Hi, I'm about to have my 25 springs installed on my 24OT, and I have the NYTOP bumper on there now. I know you have the Peak lift, but if you can speculate, do you think a slightly less than 34" tire would fit without rubbing on my setup? I hereby absolve you from any later "but you told me..."...