Accessory recommendations pls (1 Viewer)

I got two of the tailgate lights off Amazon for about $30, one for me and one for my wife. I just put in the tailgate light on mine today, it took me literally less than 5 minutes, easiest thing I’ve done with this vehicle! Loading the cooler after the next night game will be much easier now!
 
Front emblem overlay. Completely changes the look of the front end.

I did this and it made the front of my OT+ grill look very nice. Just be careful installing to make sure it lines up and doesn’t have any folds.
 
Welcome!

center console cover from amazon
View attachment 24834
I bought this and it's great. I already had a soft pad cover but it slid around on top of the center console (it doesn't wrap around the console like this one that is pictured). I was able to get this new one wrapped over my pad and get it secured around the center console. Now it looks totally stock but it is so soft and protected!

This item also popped up on Amazon and I bought it too. Total impulse buy. Kind of expensive at $28 but it's actually metal and they look great in behind each door handle. Very subtle but a very nice touch.

Amazon.com
 
I'm not a huge accessory guy, but I just installed the new SeverForm Overhead Storage Cubby last night and am really liking it.
NewCubby.webp
 
New Here y’all!

Just picked up my 2026 Eminent White Pearl GX550 OT yesterday and I’m currently trying to put to gather a list of small EZ things to add to the ride. This forum has been very helpful in feeding my G.A.S. but I’d like to know what lite mods have yall done to the exterior & interior of your GXs?

What I ordered today:

OEM LC Window Visor
OEM Front Mudguards
OEM Rear Mudguards
OEM All Weather Cargo Mat
OEM Cargo Net
Offroam MagSafe charging dash mount

What’s next:

OEM Bug Deflector
Fuel&Fire Sunglasses Nook
Tint

Any recommendations are welcome and thank you in advance!
- i got these sunglasses holders.


one each for the driver & passenger sides. I never liked installing on the sun visors, so i clipped them to the gap in the sun roof trim and they are perfect. I dont mind the cubby style but i'd rather have the glasses all dust free and not move around and fall on slopes and bumps.

Also, the cases are decent faux leather and magnetic. in a pinch, i could 'pluck' out the case and take it with me as well. will post pics later.

- yeah, the tail gate lamp is nice and bright. but too white. about 6000k color temp. also lights up the edge of the trunk and the ground belo more than the inside, but good enough. touch on/off works good


- roof access step. to reach my black onyx/ piano black roof for cleaning. careful how you use it.
https://www.amazon.com/dp/B0GDXJF67P?tag=lexusgx-20

i made a magnetic phone holder (AND wireless charger) for both driver passenger side. will share the pics soon in a thread.

i spent some research time on these daily driver comforts and conveniences and it really paid off. i look forward to driving more now :)

will post more.. soon.

Enjoy your new ride!!
 
This seems clutch 👀 adding to cart
take note that the clips are not meant for the visors. I carefully shimmied the clip into that exact location. it shouldnt be in th eway of the manual sliding hatch and completely out of the way of the motorized sunroof when done right. careful not cut yourself or the roof liner fabric.

Once you figure sliding the clip on and off, you can slightly press to open or close the metal clip to ensure snug hold to the roof liner and then just leave it there. Also the magnet is strongest in one positin of the sunglass case. check that out too.

all this sounds a bit much , but i tried 7 different well rated glass cases and found this the most comfortable in terms of where its placed. (completely out of the way) yet right above my head where i dont need to grope for it and its all one handed smooth operation after a few times. love it!
 
take note that the clips are not meant for the visors. I carefully shimmied the clip into that exact location. it shouldnt be in th eway of the manual sliding hatch and completely out of the way of the motorized sunroof when done right. careful not cut yourself or the roof liner fabric.

Once you figure sliding the clip on and off, you can slightly press to open or close the metal clip to ensure snug hold to the roof liner and then just leave it there. Also the magnet is strongest in one positin of the sunglass case. check that out too.

all this sounds a bit much , but i tried 7 different well rated glass cases and found this the most comfortable in terms of where its placed. (completely out of the way) yet right above my head where i dont need to grope for it and its all one handed smooth operation after a few times. love it!
I just put a set of the sunglass cases on, I assume the same way you did. With the sliding sunroof cover closed.. the case metallic clip seems pretty secure up there. Totally out of the way. Nice to be able to grab the case off the magnet and go.
Thanks for your posting!
DJ
 
I just put a set of the sunglass cases on, I assume the same way you did. With the sliding sunroof cover closed.. the case metallic clip seems pretty secure up there. Totally out of the way. Nice to be able to grab the case off the magnet and go.
Thanks for your posting!
DJ
ur welcome. the magnet's power is just 'ok', but once its placed right, it stays.
if n when i take the case with me, i just take a second to attach it back just right, so its secure. post a pic if you can.

saw your vehicle pics. nice build! 👍
 
Matte Anti-Glare screen protector. Simple install and avoids fingerprints left on screen

 
This one was mentioned earlier..snapped a pic today to show you that indeed it is functional and protective from scratches. This is on my driver’s door; I installed these on all 4 doors.
 

Attachments

  • IMG_1627.webp
    IMG_1627.webp
    231.2 KB · Views: 23
ur welcome. the magnet's power is just 'ok', but once its placed right, it stays.
if n when i take the case with me, i just take a second to attach it back just right, so its secure. post a pic if you can.

saw your vehicle pics. nice build! 👍
Okay, took some pics today of those eye glass cases mounted up by the sunroof sliding cover…to compliment your pics.

I really like them, thanks again TgxOtp! 😊
They are totally out of the way, you don’t notice them while driving around, they don’t interfere with entering or exiting the truck; but are right there and so easy to access when needed. Good use of available space, very cool.
I’m someone who has several pairs of glasses in my GX so these cases are very helpful!
 

Attachments

  • IMG_1623.webp
    IMG_1623.webp
    259.4 KB · Views: 21
  • IMG_1624.webp
    IMG_1624.webp
    139.4 KB · Views: 19
  • IMG_1625.webp
    IMG_1625.webp
    178.8 KB · Views: 22
  • IMG_1626.webp
    IMG_1626.webp
    97.4 KB · Views: 20
Okay, took some pics today of those eye glass cases mounted up by the sunroof sliding cover…to compliment your pics.

I really like them, thanks again TgxOtp! 😊
They are totally out of the way, you don’t notice them while driving around, they don’t interfere with entering or exiting the truck; but are right there and so easy to access when needed. Good use of available space, very cool.
I’m someone who has several pairs of glasses in my GX so these cases are very helpful!
awesome! nice to see they fit well.

I also 3d printed a key fob holder and made custom mag chargers for drive rand passenger. i am all about daily driver comforts.
I'll post pics and details soon in case it helps anyone.

Dont know if i should post them here or start a thread and in which appropriate section.
 
Matte Anti-Glare screen protector. Simple install and avoids fingerprints left on screen

really need this kind of product.

Have you installed this? please share pics in a few angles and bright day light.
I wonder if anyone makes a nano textured film like the new eyephones.
 

Users who are viewing this thread

GX550 Poll

  • Yes, I can pick up in Los Angeles (Burbank area)

    Votes: 7 41.2%
  • Yes, but I need it shipped.

    Votes: 10 58.8%
Back
Top Bottom