TE37 ordering thread (2 Viewers)

[Nurse Wright]

what lug nuts are yall using with TEs?

I run these on my TEs:

Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size); Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key & Key Storage Pouch – McGard

Black Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4; Requires 65301 (1 Hex) or 65302 (22MM Hex) Installation Tool. – McGard

 

[tph4m]

I run these on my TEs:

Black SplineDrive 5 Lug Wheel Installation Kit (M14 x 1.5 Thread Size); Set of 16 Lug Nuts, 1 Installation Tool, 4 Wheel Locks, 1 Key & Key Storage Pouch – McGard

Black Cone Seat SplineDrive Lug Nut Set (M14 x 1.5 Thread Size) – Set of 4; Requires 65301 (1 Hex) or 65302 (22MM Hex) Installation Tool. – McGard

sheesh those are pricey. I think the ray's lugs are $200shipped

 

[Kennedyusmc]

Centercaps are 400 too.
But we complain as we purchase new wheels that cost $4k and tires that cost $1.5k on truck that costs almost 100k…
So there’s that.

 

[IntrinoX/BBO]

I've got a set of 'gloss black' aka Double Pressed Black TE37 SB in a concave face.

18x8 +30 spec

Ready to dispatch with zero wait time!

 

[Bluegill]

Damn….$200 lugs, $400 center caps, $4,000 wheels?

 

[Kennedyusmc]

That’s what Volks cost!!!

 

[Bluegill]

You mofos are serious!!!

I don't begrudge anybody spending their money on their hobbies.

 

[IntrinoX/BBO]

You mofos are serious!!!

I don't begrudge anybody spending their money on their hobbies.

Buy once, cry once. You’ll appreciate the brand.

 

[ilumo]

You mofos are serious!!!

I don't begrudge anybody spending their money on their hobbies.

And here I am spending money on silly $25 puddle lights. Nice wheels.

 

[tph4m]

TE37XT
18x9 +0
285/70/18 Nitto Ridge Grapplers
$50 Amazon lug nuts
Stock Height (waiting on Westcott kit)

I had to remove the lower plastic fender pieces. It still rubs a little bit while turning but manageable while I wait for the collar kit. I love the offset!

 

[Bluegill]

TE37XT
18x9 +0
285/70/18 Nitto Ridge Grapplers
$50 Amazon lug nuts
Stock Height (waiting on Westcott kit)

I had to remove the lower plastic fender pieces. It still rubs a little bit while turning but manageable while I wait for the collar kit. I love the offset!

That's gonna look badass with the Westcott kit.

 

[Bluegill]

Buy once, cry once. You’ll appreciate the brand.

I'd be afraid to chunk them offroad at $1000 a pop.

 

[hafadaze]

TE37XT
18x9 +0
285/70/18 Nitto Ridge Grapplers
$50 Amazon lug nuts
Stock Height (waiting on Westcott kit)

I had to remove the lower plastic fender pieces. It still rubs a little bit while turning but manageable while I wait for the collar kit. I love the offset!

This is sick!! Are there centercaps available for this spec?

 

[IntrinoX/BBO]

This is sick!! Are there centercaps available for this spec?

Sure are.

 

[quacktoduck]

Just ordered my TE37
18x9 ET0 progressive II
ETA mid April/May

 

[Navi]

I've got a set of 'gloss black' aka Double Pressed Black TE37 SB in a concave face.

18x8 +30 spec

Ready to dispatch with zero wait time!

are these still available?

 

[atomicmallcrawler]

TE37XT
18x9 +0
285/70/18 Nitto Ridge Grapplers
$50 Amazon lug nuts
Stock Height (waiting on Westcott kit)

I had to remove the lower plastic fender pieces. It still rubs a little bit while turning but manageable while I wait for the collar kit. I love the offset!

Yoo!! Thank God for your post. Haha. Im in need of some temporary lug nuts for a set of TEs but im not sure which one to buy on amazon. Do you mind sharing which one you got for a temporary fix lol. Thanks!!

 

[tph4m]

Yoo!! Thank God for your post. Haha. Im in need of some temporary lug nuts for a set of TEs but im not sure which one to buy on amazon. Do you mind sharing which one you got for a temporary fix lol. Thanks!!

Amazon.com

 

[Kennedyusmc]

 

[hafadaze]

18x9 +0 TE37X in mag blue with 275/65/18 Yokohama X-ATs... Stock height + no rubbing!