Cannot customize the central driver's gage cluster...

[mm9351]

Hey everyone, was wondering if someone can provide assistance. I have been trying for some time to customize the central driver's gage cluster. I understand that we have 3 different screen options, toggling the left / right arrows, but I cannot get the center section display a speedometer gage, with the 0/P appearing inside a circular gage. I only see the 0/P in the center but inside an empty field, no gage. I can only set the LHS to a tach and the RHS as the speedometer. All of the Lexus media / photos and even YouTube how-to videos show the center gage as a speedometer / tach as a display option. I have no problem setting the small rectangular frame in each of the three sections with different data (holding the OK button and scrolling up / down) without an issue. But toggling through 1, 2, and 3 of the main displays and trying all available options I cannot show the central speedo. Even tried to setup different gages in Sport / Normal / ECO but it simply does not work. Then I was thinking my software may be down rev'd, but confirmed it is up to date (per the main display). Thanks in advance for your help!

 

[munkeeboi]

to get what you want, you have to change it in the settings on the center screen

 

[mm9351]

Thanks, it worked when I set to "meter type 1' on the center display which I thought I had adjusted previously. The owner's manual wasn't clear on this, or perhaps I was looking at the wrong section. Appreciate your advice.

 

[JoeRob]

In the Lexus Owner's Manual, go to page 79, 2-1 Instrument Cluster, Multi-Information display, go down to Display contents and begin reading. This will define the areas of the display in front of the driver and how to customize. Areas A, C and B.
Then, go to Page 83, right hand column, Displayed content and view down the column and see which buttons/controls you maniipulate to make changes to those areas of your driver display. The cursor is operated by the steering wheel left hand "spoke" up/down/left/right buttons and then when you get what you want, depress the OK button in the center of the cursor buttons.
The different meter types, 1, 2, 3 are selected in the center display, go to top of page 84 in the owner's manual, left hand column, then you might go to page 570, to see how to change the different types.
Hope that helps.